Support SECAM tuners AverMedia JOYTV
These tuners in the sale may be configured to receive TV programs exclusively in the format PAL. This problem can be solved in two ways - bring the tuner to Manufacturing Company within the warranty department (if the device is under warranty) or try to self-reconfigure it. Further material is self-change standard that will operate the tuner, and implies self to open the enclosure and permutation jumpers on the board. Note that these operations require great accuracy, and negligent acts certainly lead to loss of warranty! Therefore, all actions are taken at your own risk!
We studied an instance tuner opened quite simple. The halves of the enclosure are not connected by any screws, so gently pulling the rear edge of the top cover, it was able to detach from the bottom. Be careful, as near the front wall, there are three tabs. Further, all very simple - near the reception of the tuner box has a label with details of the position of jumpers, jumpers and themselves - from the opposite edge of the board. In our illustrations show the position of the jumpers for Secam D / K, and the receiving part of Philips. Click photos can be increased. Rearranging jumpers in position, carefully connect the housing halves.
And if they are recommended to disconnect, from the back wall, it is best to combine evenly pressing all around. The latches on the front edge of the housing engage c little effort.
0 comments:
Post a Comment